- Address:West of Beihuan Road ,Muye District,Xinxiang City,HeNan P.R China
- Mobile:+86 18568231957
- Tel:0373-2611121
- Fax:0373-2611121
- OnLine QQ:2456689896
- E-mail:overseas02@zlqyc.com
- Web:http://www.zlqyc.com
PRODUCTS
Zhongliqi Fluorescent Offset Sublimation Ink
Zhongliqi Fluorescent Offset Sublimation Ink
Profile of Fluorscent Offset Sublimation Ink
Sublimation inks are designed to apply a mirror image onto paper for transfer to the final substrate.
The prints are transferred via heat and pressure onto most polyester or synthetic materials.
When first printed onto paper, sublimation inks appear to be weaker and duller than standard inks,
however when transferred onto suitable substrates, the dyes develop their true color strength and brilliance.
1. Use Principle of Fluorescent ink sublimation offset
It is used on all kinds of offset machine. With the ink,first print image on paper, then transfer
various materials by heat transfer press, especially for polyester fabric. Under high temperature,
become gas and go into fabric.
2. Printing Techniques
OFFSET (one color, two color and four color machines).
3. Colors
Magenta & Yellow.
4. Specofic Supports
Coated paper, offset paper, chrome paper, calendered paper from 80-90 gr/m²with dimensional stability.
5. Suitable Fabrics
Polyester fabric.
Triacetate fabric.
Nylon fabric.
Acrylic fabric.
Polypropylene nitrile fabric.
6. Use Method
(1)Be able to adapt to the demand for middle-speed or high-speed printing.(2)During the normal condition, use the ink on the machine directly.
7. The printing process just need 3 steps
(1)Print the image on paper, and normal paper is ok
.(2)Put the printed paper on substrate, such as polyester and nylon fabric.
(3)Put the paper and fabric on the heat-transfer machine. When the temperature reaches 180-220°C, the image will be transfer printed from paper onto the substrate.
8. Product Characteristics Product characteristics
* No Crusta.Granula size is less than 5 micron.b.No crust in 7 days. (open the cover)
* SafetyPassed SGS,DGM,MSDS,totally environment-friendly!
* AdvantageGood stability on the machine,clear dot reproduction,excellent ink-water balance.Be able to adapt to the demand for middle-speed or high-speed printing.During the normal condition, use the ink on the machine directly.
*P.S. please make samples before the final printing to confirm the exactly image.
9. Application examples
a.To get 50%C on fabric,the color on paper should be 30%C
b.To make red PS-plate,the ratio is 100%M and 35%-40%Y
c.To make blue PS-plate,the ratio is 100%C and 20%M
d.To make green PS-plate,the ratio is 80%C and 90%Y
e.To get yellow like Asian skin,the ratio is 10%~11%M and a little cyan.Cyan can be adjusted according to your requirment.
10. Transfer temperature
About 180-220°C
Transfer Time
About 15-40 seconds
The following is the transfer printing parameters for your reference
Name of fabric |
Transfer temperature |
pressure |
Time |
Polyester fabric |
205℃~220℃ |
0.5kg/cm2 |
10~30 seconds |
Polyester deformation fabric low elastic |
195℃~205℃ |
0.5kg/cm2 |
30 seconds |
Triacetate fabrics |
190℃~200℃ |
0.5kg/cm2 |
30~40 seconds |
Nylon fabric |
195℃~205℃ |
0.5kg/cm2 |
30~40 seconds |
Acrylic fabric |
200℃~210℃ |
0.5kg/cm2 |
30 seconds |
Two acetate fiber fabric |
185℃ |
0.5kg/cm2 |
15~20 seconds |
Polypropylene nitrile |
190℃~220℃ |
0.5kg/cm2 |
10~15 seconds |
Dye degree (European standard)
Color fastness |
||||
Color |
Magenta |
Yellow |
Blue |
Black |
Rank |
5-6 |
6 |
5 |
5 |
Please be noted
The control of the colors is always carried out after the transfer of the final supports.
The relationship between the temperature and the time of contact is important in order to have the
optimal color resistance and ink penetration (the longer the time of transfer, the better the ink penetration of the fabric).
Packing
1kg/tin or 2kg/tin. 12kg/carton. carton inside,wooden outside.